Why Use Entrance Matting


Entrance Matting Systems Specification Guidelines

People entering a building do not often stop and wipe their feet so its important that an entrance mat is long enough to ensure there are enough contacts between the entry matting and the soles of shoes to minimise the amount of dirt carried into the building. The Australian and New Zealand’s codes recommendation is that a mat should have a minimum dimension of 1.8 metres from front to back which allows for 2 contacts of each foot. Refer Acceptable Solution D1/AS1 Access Routes.

Zone 1
Zone 2
Zone3
External Matting to remove coarse dirt, leaves and grit prior to entering the building. Entry Carpet System that thoroughly removes all remaining moisture. Entry carpet system that thoroughly removes all remaining moisture
ReTread Axis
Shuttle
CoralTread
StarTread
ExtraTread
Orbit
Advance has a variety of other
entrance matting solutions that are suitable for zone 3.
For more information visit advanceflooringsystems.com

A full zonal Entrance Matting System can be achieved using a combination of different products within the Advance Entrance Matting range. ReTread matting inserts are designed for external/exposed/concentrated traffic areas and Polyamide and Polypropylene fibre inserts are designed for internal use.

Product Summary

Please Note: Axis is supplied with Polyamide infills only.
Polyamide is a cut pile yarn system and polypropylene is a loop pile yarn system.

Product Performance

Advance products are designed for optimal performance
when consideration is given to Zonal applications

For more information visit advanceflooringsystems.com